Step 1: Installing The Simulator And Debugger Software - Motorola SCOUTTRAINER25 User Manual

Step 1: Installing the Simulator and Debugger Software

3.2 Step 1: Installing the Simulator and Debugger Software
This section explains how to install the simulator and debugger software on
your hard-disk system. The software package is shipped on a CD-ROM. To
install the software, you must mount the CD-ROM, copy the files, and unmount
the CD-ROM.
Mounting the CD-ROM
Note: Root Privileges
You must have root privileges to mount the CD-ROM. If you don't, get help
from your system administrator.
You can mount the CD-ROM using the UNIX mount command or the SAM
(system administration manager):
-
-
Copying the files
After you mount the CD-ROM, you must create the directory that will contain
the debugger software and copy the software to that directory.
1) Create a directory named sim2xx on your hard disk. To create this
2) Copy the files from the CD-ROM to your hard-disk system:
3-4
To use the UNIX mount command, follow these steps:
1) To mount the CD-ROM, enter:
mount –rt cdfs /dev/dsk/ your_cdrom_device /cdrom
exit
2) Make the hp700 directory on the CD-ROM the current directory. For
example, if the CD-ROM is mounted at /cdrom, enter:
cd /cdrom/hp700
To use SAM to mount the CD-ROM, see System Administration Tasks , the
HP documentation about SAM, for instructions.
directory, enter:
mkdir / your_pathname /sim2xx
cp –r * / your_pathname /sim2xx