Copying the files
After you mount the CD-ROM, you must create the directory that will contain
the debugger software and copy the software to that directory.
1) Create a directory named sim2xx on your hard disk. To create this
2) Copy the files from the CD-ROM to your hard-disk system:
Unmounting the CD-ROM
Note: Root Privileges
If you are running SunOS 4.1.x, 5.0, or 5.1, you must have root privileges to
unmount the CD-ROM. If you don't, get help from your system administrator.
You must unmount the CD-ROM after copying the files.
-
-
Step 1: Installing the Simulator and Debugger Software
directory, enter:
mkdir / your_pathname /sim2xx
cp –r * / your_pathname /sim2xx
If you have SunOS 4.1.x, 5.0, or 5.1, enter the following from a command
shell:
cd
umount /cdrom
eject /dev/sr0
exit
If you have SunOS 5.2 or higher, enter the following from a command
shell:
cd
eject
Installing the Simulator and C Source Debugger With SunOS
2-5