Motorola SCOUTTRAINER25 User Manual page 31

Software checklist
Operating system
Root privileges
Software tools
Optional files
included with the
debugger package
HP-UX 9.x or higher.
You must have root privileges to mount and unmount the CD-ROM.
If you don't, get help from your system administrator.
TMS320C2xx assembler and linker
Optional: TMS320C2xx C compiler
siminit.cmd is a general-purpose batch file that contains debugger
commands. This batch file, shipped with the debugger, defines a
'C2xx memory map. When you first start using the debugger, this
memory map should be sufficient for your needs. Later, you may
want to define your own memory map. For information about defin-
ing your own memory map, refer to the defining a memory map
chapter in the TMS320C2xx C Source Debugger User's Guide. If a
memory map batch file isn't present when you invoke the debugger,
all memory is invalid initially.
sim203.cmd and sim209.cmd are batch files containing commands
that configure a memory map of 'C203 and 'C209 devices, respec-
tively.
init.clr is a general-purpose screen configuration file. If init.clr isn't
present when you invoke the debugger, the debugger uses the de-
fault screen configuration.
init.25 , init.43 , and init.50 have been provided for basic 80
 
80 43, and 80 50 screen sizes, respectively. The init.clr file
brings up the debugger in 80
in another mode, copy one of the init.xx files to the init.clr file.
The default configuration is for color monitors; an additional file,
mono.clr , can be used for monochrome monitors. When you first
start to use the debugger, the default screen configuration should be
sufficient for your needs. Later, you may want to define your own
custom configuration.
For information about these files and about setting up your own
screen configuration, refer to the customization information in the
TMS320C2xx C Source Debugger User's Guide .
Installing the Simulator and C Source Debugger With HP-UX
What You Need

25 mode. To bring the debugger up

25,
3-3