Table of Contents
Advertisement
3D DNR (Digital Noise Reduction) Setting
Digital Noise Reduction reduces the noise/
distortion on the screen in night mode, allowing
clear images in low-light conditions. Set 3D DNR
to OFF, LOW, MIDDLE, or HIGH. The default
setting is HIGH.
Color Menu
White Balance Setting
Set WHITE BAL to AWB, ATW, PUSH, or MANUAL to set the White Balance mode.
ATW
Auto Tracking White Balance mode compensates for color temperature changes between 2400°K
and 11000°K.
AWB
Auto White Balance Control mode compensates for color temperature changes between 2000°K
and higher than 15000°K.
PUSH
Push mode automatically fixes the white balance based on current lighting. For best results, place a
white item (such as a piece of paper) in front of camera during adjustment.
MANUAL
Manual mode lets you manually adjust the color temperature (KELVIN) or the red gain and blue
gain levels (R/B-GAIN) while monitoring the color of the image.
COLOR GAIN
Set the color gain from 0 to 20.
14
Advertisement
Table of Contents
