NOTE:
Before you turn on the projector again, wait for 60 seconds
to allow the internal temperature to stabilize.
Disconnect the power cord from the electrical outlet and the projector.
4
Menu Settings
• The projector has a multi-language On-Screen Display (OSD) Menu that
can be displayed with or without an input source.
• Press the Menu button on the remote control to enter the Main Menu.
• To navigate through the tabs in the Main Menu, press the
buttons on the remote control.
• To select a submenu, press the
• To select an option, press the
When an item is selected, the color changes to dark blue.
• Use the
or
• To go back to the Main Menu, press the
• To exit the OSD, press the Menu button directly on the remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
VGA-A—
Press
VGA-B—
Press
HDMI-A/MHL—
HDMI-B—
Press
W
/LAN—
IRELESS
menu.
NOTE:
The WIRELESS/LAN can be used after the "Wireless and LAN"
option is turned on.
USB—
Press
32
Using Your Projector
buttons on the remote control to adjust the settings.
to detect a VGA-A signal.
to detect a VGA-B signal.
Press
to detect a HDMI-A/MHL signal.
to detect a HDMI-B signal.
Press
to activate the Input Source WIRELESS/LAN
to activate the Input Source USB menu.
or
button on the remote control.
or
buttons on the remote control.
button on the remote control.
or