Dell S510 User Manual page 134

Problem (continued)
DoUSB not displaying
IR Pen location offset
134 Troubleshooting Your Projector
Possible Solution (continued)
• Windows
Display over USB Should run
automatically. To manually run USB
display, go to My Computer and run
"USB_Display.exe".
• MAC
Go to CDROM: USB_DISPLAY and run
a
"MAC_USB_Display.pkg".
Follow the on-screen instruction to
b
complete installed.
Reboot system, and then re-connect
c
USB cable to the computer and the
projector.
NOTE:
You may require
administrator level access to install
the driver. Contact your network
administrator for support.
Ensure the output resolutions of the
1
projector and computer are 1280x800.
Select "second screen only" on the
2
computer.