Dell S510 User Manual page 39

2 Saturation, Sharpness, and Tint only available when the input source
is from Composite.
I S
MAGE ETTINGS
image settings. The image settings menu provides the following options:
VGA O
UTPUT
standby status. Default is Off.
D S
ISPLAY ETTINGS
settings. The display settings menu provides the following options:
H
ORIZONTAL
move the image left.
V P
ERTICAL
the image down.
F
REQUENCY
match the frequency of your computer's graphics card. If you see a
vertical flickering wave, use the Frequency control to minimize the
bars. This is a coarse adjustment.
T —Synchronize the phase of the display signal with the
RACKING
graphic card. If you experience an unstable or flickering image, use
Tracking to correct it. This is a fine adjustment.
(N I S
O NPUT OURCE
—Select On or Off the VGA output function at projector
( PC M )—
IN ODE
P —Press
OSITION
—Press
OSITION
—Allows you to change the display data clock frequency to
)—
Select and press
Select and press
to move the image right and
to move the image up and
Using Your Projector
to activate
to activate display
to
to move
39