Dell S510 User Manual page 45

NOTE:
Use
1
Gateway, DNS, and Store.
Press the
2
Gateway or DNS to set the value. (The selected option is
highlighted in blue)
a
b
c
After the IP Address, Subnet Mask, Gateway, and DNS is set
3
up, select Store and press
If you select Store without pressing the Enter button, the
4
system will keep the original settings.
R —Press
ESET
W S
IRELESS ETTINGS
wireless settings menu provides the following options:
DHCP S
ERVER
S IP A
TART
address of the DHCP server to the projector connected to the wireless.
E IP A
ND DDRESS
of the DHCP server to the projector connected to the wireless.
S M
UBNET
G —Check the Gateway address with your network/system
ATEWAY
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S —Press
TORE
settings.
and button to select IP Address, Subnet Mask,
button to enter IP Address, Subnet Mask,
Use and
Use and
After the setup is complete, press the
to reset network configuration.
—
Select and press
—Allows you to enable DHCP server of the wireless.
—Automatically or manually assigns the Start IP
DDRESS
—Automatically or manually assigns the End IP address
—Configure the Subnet Mask of the wireless connection.
ASK
to save the changes made in wireless configuration
button to select the option.
button to set the value.
button to store the settings.
to activate wireless settings. The
Using Your Projector
button to exit.
45