Network Settings Menu - Dell 5100MP Owner's Manual

PIP S —Adjust the image size of the foreground display.
IZE
PIP X P —Horizontally adjust the image position of the PIP display.
OSITION
PIP Y P —Vertically adjust the image position of the PIP display.
OSITION
PBP I —Select On to enable the picture-by-picture display. Select Off to
MAGE
disable the picture-by-picture function.

Network Settings Menu

position, up or down button to change the number.
DNS—Type in the IP address of DNS server on the network connected to the
projector. 12 numeric characters are used.
A C —Press to confirm the settings.
PPLY HANGE
R N S
ESET ETWORK ETTING
34 Using Your Projector
PIP I
MAGE
select following settings. Select Off to
disable the picture-in-picture display
function.
PIP S
OURCE
the display source one by one for the
foreground display. The possible PIP source is
available in the OSD selection depending on
the current primary input source. The possible
combination of the sources refer to page 56.
DHCP —Select On to assign an IP address to
the projector from a DHCP server
automatically. Select Off to assign an IP
address manually.
IP A
DDRESS
address. Press left or right button to select the
number position, up or down button to change
the number.
S
UBNET
mask number. Press left or right button to
select the number position, up or down button
to change the number.
G
ATEWAY
the network connected to the projector. Press
left or right button to select the number
—Press to the default setting.
Select On to enter Options to
—
—Use PIP Source to step through
—Press Enter to set up an IP
M —Press Enter to set up an subnet
ASK
—Select to set the default gateway of