Table of Contents
Advertisement
HP MSM313/MSM323 Deployment Guide
E. Configure the radios
1. Select Wireless > Radios.
2. Under Radio 1:
• Set Operating mode to Access point only.
• Set Wireless mode to 802.11a.
• Set Channel to Automatic.
3. Clear the Radio 2 checkbox.
4. Click Save.
F. Configure the local mesh link
1. Select Wireless > Local mesh.
2. Click Add New Profile.
3. Set Name to Local mesh #1.
4. Under Settings:
• Select Enabled.
• For Use, select Radio 1.
5. Under Security:
• Enable the checkbox.
• Select AES/CCMP.
• For PSK, specify between 8 and 64 ASCII characters. It is recommended that the key be at
least 20 characters long and be a mix of letters and numbers.
6. Under Addressing,
• Select Dynamic.
• For Mode, select Master.
• For Mesh ID, leave the default setting of 1.
7. Click Save.
73
3 Local mesh deployment
Advertisement
Table of Contents
