HP MSM313/MSM323 Deployment Guide
• Under Wireless protection:
• Select the checkbox and select 802.1X.
• Select the Mandatory authentication checkbox.
• Select the WEP encryption checkbox.
• Click Save.
Service controller configuration
A. Configure the Internet port
1. Select Network > Ports > Internet port.
2. Select Static and click Configure.
3. Under Settings:
• Set IP address to 192.168.5.3.
• Set Address mask to 255.255.255.0.
• Click Save.
B. Set the shared secret on the service controller
1. Select Public access > Access control.
2. In the Access controller shared secret box, set Shared secret and Confirm shared secret
to a unique string. For example: xr2t56. This password will be used by the APs to send
authentication requests to the service controller.
3. Click Save.
C. Create a RADIUS profile
1. Select Security > RADIUS profiles.
2. Click Add New Profile.
3. In the Profile name box, assign RADIUS Profile 1 to the new profile.
4. In the Settings box, use the defaults except for Authentication method which must match the
method supported by the RADIUS server.
5. In the Primary RADIUS server box, specify the address of the RADIUS server and the secret
the service controller will use to login.
D. Create VSCs on the service controller
Follow this procedure to create virtual service communities on the service controller that match
each VSC you configured on the APs:
1. Select VSC > Profiles.
2. On the Virtual Service Communities page, click the HP ProCurve profile to edit it.
71
3 Local mesh deployment