Create A Radius Profile; Configure The Service Controller To Retrieve Attributes From The Radius Server; Create Vlans - HP MSM313 Deployment Manual

HP MSM313/MSM323 Deployment Guide
B. Create a RADIUS profile
1. Select Security > RADIUS profiles.
2. Click Add New Profile.
• In the Profile name box, assign RADIUS1 to the new profile.
• In the Settings box, use the defaults except for Authentication method which must match
the method supported by the RADIUS server.
• In the Primary RADIUS server box, specify the address of the corporate RADIUS server
and the secret the service controller will use.
• Click Save.
C. Configure the service controller to retrieve attributes from the
RADIUS server
1. Select Public access > Attributes.
2. Select the Retrieve attributes using RADIUS option.
3. Select the RADIUS profile you defined (RADIUS Profile 1).
4. Specify the username and password the service controller will use to login to the RADIUS
server.
5. Click Retrieve Now. The service controller will login and retrieve the attributes.
6. Click Save.
D. Create VLANs
1. Select Network > Ports.
2. Under VLAN configuration, click Add New VLAN.
• Under General
• Leave the Port selection as LAN port.
• Set VLAN ID to 30.
• Set VLAN name to Management.
• Under Assign IP address via, select Static.
• Set IP address to 192.168.30.1.
• Set Mask to 255.255.255.0.
• Leave Gateway blank.
• Click Save.
41 2 Public/guest networks