HP MSM313/MSM323 Deployment Guide
Scenario 1b: Hotspot with custom interface
This scenario adds custom settings to the default public access interface used in
Scenario 1a.
This scenario illustrates how to customize the operation of the public access interface by defining
custom web pages on a third-party web server and loading them onto the service controller.
How it works
In this scenario, a web server is used to store custom pages for the public access interface. The
service controller loads these pages instead of using the default pages.
In this version, the web server is located on local LAN B, however it could also be located on the
Internet.
Management
station
1.2
1.3
LAN A
192.168.1.0
Service
controller
1.4
1.5
The router is also the DHCP server for LAN B, operating on subnet 192.168.5.0. The service
controller's Internet port is set to operate as a DHCP client.
Configuration road map
Start with the configuration defined in Scenario 1a.
Note:
A. Configure the Internet port
1. Select Network > Ports > Internet port.
2. Select DHCP Client and click Save.
14
Web server
5.1
Router
Firewall
LAN B
192.168.5.0
1.1
5.2
1.7
1.6
2 Public/guest networks