Ports; Radios; Antennas - HP 650 Installation Manual

Figure 2 Back view
1. Ethernet port
2. Console port
3. AP bracket tab

Ports

The following ports are located on the back of the HP 560 as shown in
Ethernet port: Auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45 connector. This port
supports IEEE 802.3af and 802.3at Power over Ethernet (PoE).
Console port: A standard serial port with RJ-45 connector. To connect to a computer, use a
standard serial cable. For more information, see "Console Ports" in the HP MSM APs
Configuration Guide.

Radios

The HP 560 has two radios:
Radio 1: Supports 5 GHz 802.1 1a/n/ac.
Radio 2: Supports 2.4 GHz 802.1 1b/g/n.

Antennas

The HP 560 has two integrated 3-element MIMO antennas.
2
1
3
4
5
4. Cable channel
5. Reset button
Figure 2 (page 5):
Ports 5