Create Vscs - HP MSM313 Deployment Manual

HP MSM313/MSM323 Deployment Guide
3. Under VLAN configuration, click Add New VLAN.
• Under General
• Leave the Port selection as LAN port.
• Set VLAN ID to 40.
• Set VLAN name to Guest.
• Under Assign IP address via, select None.
• Click Save.
4. Under VLAN configuration, click Add New VLAN.
• Under General
• Leave the Port selection as LAN port.
• Set VLAN ID to 50.
• Set VLAN name to Public.
• Under Assign IP address via, select None.
• Click Save.
E. Create VSCs
The following two virtual service communities need to be created on the service controller:
• Guest: Used for APs installed in hotel rooms. Forwards guest traffic on VLAN 40.
• Public: Used for APs installed in public spaces. Forwards public traffic on VLAN 50.
1. Select VSC > Profiles.
2. On the Virtual Service Communities page, click the HP ProCurve profile to edit it.
3. On the Add/Edit Virtual Service Community page:
• Under General, set Name to Guest.
• Under General, select the Provide access control checkbox.
• Under VSC ingress mapping, clear the SSID checkbox.
• Under VSC egress mapping, select VLAN then select Guest.
• Enable HTML-based user logins.
• Select the RADIUS authentication checkbox.
• For RADIUS Profile, select RADIUS1.
• Click Save.
4. On the Virtual Service Communities page, click Add new profile.
42 2 Public/guest networks