Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lilin FD2452E
Summary of Contents for Lilin FD2452E
-
Page 1: Quick Installation Guide
FD2452E D/N Megapixel 360° Panorama Dome IP Camera Quick Installation Guide... - Page 2 CAUTION Do not drop or strike this equipment Do not install the equipment near any naked flames or heat sources Do not expose this unit to rain, moisture, smoke or dust environment Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor ventilated places.
-
Page 3: Product Overview
Product Overview Unit: mm ① Alarm In/Out Terminal ② Audio Input 3.5mm Phone Jack (Red) ③ Audio Output 3.5mm Phone Jack (Green) ④ Live Video Output BNC Jack ⑤ RJ-45 Network Connector (Support PoE) ⑥ DC Power Input Jack (DC12V ±10%) ⑦... -
Page 4: Installation
Installation Installation Structural Drawing Embedded Mounting Attached Mounting (Ceiling base is optional) - 2 -... - Page 5 ● Embedded Mounting (False Ceiling) 1. Please use the screw driver to untighten the screws on the top cover (FIG. 1), and to untighten the screws on the cylinder (FIG. 2). Based on the hole site diagram below to cut the circle of diameter 3.6-4.1 inches (90-105mm) (FIG.3, FIG.
- Page 6 4. Attach the camera body to the fixed ring (FIG. 7). Tighten the screws to fix the camera body (FIG. 8). 5. Put the decorative ring on the camera body. Ring’s positioning column should be between camera body positioning column and screw nut (FIG.
- Page 7 ● Attached Mounting (Fixed Ceiling) 1. Camera base size and screw location (FIG.11) ， and tighten the four tapping screws into the ceiling (FIG.12). The fixed ring placed on the base (FIG.13). Tighten the four screws into the base (FIG. 14). 3.
- Page 8 4. Attach the camera body to the fixed ring. Camera body screw hole should be aligning to fixed ring’s latch position (FIG.16). Tighten the two screws to fix the camera body (FIG.17). 5. Put the decorative ring on the camera body. Ring’s positioning column should be between camera body positioning column and screw nut (FIG.18).
- Page 9 System Architectures For connecting HD IP cameras to the network, please follow one of the system architectures: (1). Use a DC12V power adapter and a network switch to connect to the network. (2). Use a PoE network switch to connect to the network. (3).
-
Page 10: Emergency Factory Default
JPEG or H.264 Full HD video. When you login to the IP camera by Internet Explorer, the security warning dialog box will prompt the installation of the LILIN Universal ActiveX. Click Install to download it. - 8 -... - Page 11 IPScan software from the installation CD, and paste to your computer. Alternatively, you can execute the IPScan software from the installation CD, or download the software from the Merit LILIN website (www.meritlilin.com). To change the settings of the IP address, subnet mask, gateway, or HTTP port, you can follow the steps below: 1.
- Page 12 Configuring IP Addresses via Web Interface To change an IP address via web interface, type the default IP address (192.168.0.200) in the Internet browser and follow the steps below: 1. Login to the H.264 Full HD IP camera by the default username “admin”...
- Page 13 Once complete, you can access the IP camera’s live video by entering the default IP address via your Internet browser. As the security warning dialog box appears, click OK to download the ActiveX directly from the IP camera. Login There are two levels of user authentication, including admin and guest, that can access the IP camera.
- Page 14 66-IPD2452CSM...
Need help?
Do you have a question about the FD2452E and is the answer not in the manual?
Questions and answers