Mechanical Disassemblies
7. POWER, SUB POWER BOARD and FAN(FN903, FN904)
REMOVAL
1) Remove 2 screws (A) and remove the FAN(FN903).
2) Remove 4 screws (B) and remove the duct cover.
3) Remove 2 screws (C) and remove the Sub Power board.
4) Remove 4 screws (D) and remove the shield box.
5) Release 4 hooks (E) on the shield box and remove the shield box cover.
6) Remove the Power unit by sliding it to the upward.
7) Remove 2 screws (F) and remove the FAN(FN904).
Power Board
B
A
A
B
B
FN903
-13-
E
B
Duct
E
Cover
E
FN904
F
F
C
C
D
D
Sub Power Board
Fig.7
Shield Box Cover
E
D
D