Table of Contents
Advertisement
Mechanical Disassemblies
5. LAMP BALLAST BOARD and FAN(FN905) REMOVAL
1) Remove 2 screws (A) and disconnect the lamp socket.
2) Remove 4 screws (B) and pull the lamp ballast unit upward.
3) Release 4 hooks (C) on the shield box and remove the shield cover.
4) Pull out the lamp ballast unit by sliding it to the upward.
5) Remove 2 screws (D) and remove the FAN (FN905).
6. AV JACK BOARD REMOVAL
1) Pull out the AV Jack board ass'y upward and remove a screw (A).
2) Remove 4 screws (B) and then take out AV Jack board ass'y.
3) Remove 6 screws (C) and 4 screws (D), then remove the AV Jack board.
B
B
B
B
AV Jack Board
A
-12-
B
D
D
FN905
C
D
A
A
Shield Cover
Lamp Ballast
Board
B
C
C
C
B
C
B
Fig.5
Fig.6
Advertisement
Table of Contents
