Fujitsu AUU7RLF Design & Technical Manual page 24

MODEL: AR-REG1U
„ „
FEATURES
„ „
Ü 4 mode timer setup available (ON / OFF / PROGRAM / SLEEP).
Ü Easy operation.
Ü Easy to change custom code (max. 4 custom codes) by button operation.
REG1U
Built-in timers
z „
Select from four different timer programs (On / Off / Program / Sleep).
Program timer
z „
The program timer operates the on and off timer once within a 24-hour period.
Sleep timer
z „
The sleep timer function automatically corrects the temperature thermostat setting according to
the timer setting to prevent excessive cooling and heating while sleeping.
Cooling operation/dry operation
When the sleep timer is set, the set temperature
automatically rises 2°F (1°C) every hour. The set
temperature can rise up to a maximum of 4°F (2°C).
Timer setting
60min.
2°F (1°C)
Simple function setting
z „
Setting of the air conditioner selection function is performed by remote controller.
Switching remote controller custom code
z „
Mixed-up
I.U. I.U. I.U. I.U.
Code selector switch eliminates unit
•
„
being wrongly switched.
(Up to 4 custom codes can be set.)
*I.U.=Indoor unit
To change the temperature unit
z „
Easy to change the temperature unit (
4°F (2°C)
After code change
A B C D
I.U. I.U. I.U. I.U.
A B C D
↔
°F °C) by button operation.
- (01 - 20) -
Heating operation
When the sleep timer is set, the set temperature
automatically drops 2°F (1°C) every 30 minutes. The
set temperature can drop to a maximum of 8°F (4°C).
2°F
(1°C)
4°F
(2°C)
30min.
60min.
90min.
Timer setting
6°F
8°F
(3°C)
(4°C)