Fujitsu AUU7RLF Design & Technical Manual page 142

FUNCTION SETTING
„ „
(3) Press the " " or the "
Each time the "MIN HEAT" button is pressed, it switches between the one's place and the
ten's place positions.
Change digit
(4) Press the "POWERFUL" button to proceed
to the setting number.
(Press the "POWERFUL" button again to
return to the function number selection.)
(6) Press the "MODE" button once to send the
function mode information.
FUNCTION DETAILS
„ „
Refer to 13-5. FUNCTION DETAILS
" buttons to select the function number.
(5) Press the "
Each time the "MIN HEAT" button is
pressed, it switches between the one's
place and the ten's place positions.
(7) Press the "
Note: Please push "
- (01 - 138) -
Change digit
" or the "
select the setting number.
/ " button once to send the
function setting information.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No response
/ " button within 30 seconds
after pushing "MODE" button.
" buttons to
Change digit
Pi Pi