Uty-Rnnum - Fujitsu AUU7RLF Design & Technical Manual

13-3-1.

UTY-RNNUM

SWITCHING SELECTION OF FUNCTION SETTING MODE
„ „
(2) To activate the function setting mode, hold down the three buttons of SET TEMP. V, SET
TEMP. Λ and FAN at the same time for 5 seconds or longer.
BUTTON NAME AND FUNCTION
„ „
● During address setting mode, indoor unit reject the any operation command from remote
controller.
Function number
Refer to FUNCTION DETAILS
Remote controller address
It fixes to 00.
SET TIME "<" and ">" button
Switches the function number.
Function setting mode initial display
- (01 - 142) -
Setting number
Refer to FUNCTION DETAILS
Λ
SET TEMP. "V" and " " button
Switches the setting number.
TIMER SET button
Transmits function setting