Pattern C
z
1) Modify the remote controller cable as per below methods.
●
Use a tool to cut off the terminal on the end of the remote controller cable and then remove
the insulation from the cut end of the cable as shown in Fig.
●
Connect the remote controller cable and connecting cable as shown in Fig.
●
Be sure to insulate the connection between the cables.
Remote controller
cable
2) Method of connecting remote controller cable
●
Connecting cable made by above-mentioned 1) is connected with PCB of Indoor unit.
Connecting
cable
Remote controller
cable
Connecting
cable
White
Red
Black
White
Red
Insulated
connection
Black
Indoor unit PCB
- (01 - 28) -