Ioline FlexJet E Quick Start Manual page 13

Step 4: Attach the Top Bar (2H+ FJE Models Only)
1. Some FJE Models with two or more print heads include a high
speed printing kit with a rolling rear top bar. On these ma-
chines there are two heavy aluminum rods and one light short
aluminum rod included with the printer. The shorter heavy
aluminum grey rod is the rolling top bar attached to the stand.
The longer heavy aluminum rod (painted black on later mod-
els) is the rear dancer bar explained later in Paper Loading,
Step 7.
2. Find the top bar support hardware on the left leg. It is holding
a silver spacer against the left leg.
3. Gather two 7/16-inch or adjustable open ended wrenches.
Hold one of the nuts on the left support hardware with one
wrench and turn the other nut with the other wrench. Take the
'C' shaped spacer off the support when the nuts are loose and
set it aside.
Top Bar Support
Hardware on Left Leg
13