Table of Contents
Advertisement
4.
Align the holes in the foot with those in the leg. 6 of the holes
should align when correctly positioned.
5.
Insert two 1.5-inch long 1/4-20 screws through the foot and
into the threaded nuts in the stand leg. Turn them loosely by
hand only.
1.5-in Screw (2)
6.
Insert four 1.5" long 1/4-20 screws through the holes in the
stand leg and all the way through the foot. Turn four nuts
loosely by hand onto the end of the screws.
1.5-in Screw (4)
7.
Tighten all six screws with the included T-handle Allen wrench
and a 7/16-inch open ended wrench on the four nuts.
1/4-20 Nut (4)
11
Advertisement
Table of Contents
