Worx WG118E Safety And Operating Manual page 3

22. Take care against injury from any device
fitted for trimming the filament line length.
After extending new cutter line always
return the machine to its normal operating
position before switching on;
23. Never fit metal cutting elements;
24. Always ensure that ventilation openings
are kept clear of debris.
MAINTENANCE
a) After use, disconnect the machine from the
mains and check for damage;
b) When not in use store the machine out of
the reach of children;
c) mains powered trimmers should only be
repaired by an authorised repairer;
d) Use only manufacturers recommended
replacement parts and accessories.
WARNINGS:
WARNING: Cutting elements continue to
-
rotate after the motor is switched off,
- Keep extension cords away from cutting
elements;
It is recommended that appliances should be
supplied via a residual current device (RCD)
with a tripping current of not more than 30mA.
2-in-1 Grass Trimmer/Edger WG1 18E
SYMBOLS
Read instruction sheet
Double insulation
Wear eye protection
Do not expose to moisture.
Keep bystanders away.
Disconnect the mains plug if the
cord is damaged or entangled.
RCm approval mark
Edging
Trimming
3