PRODUCT SAFETY battery pack may create a risk of fire when used with another battery pack. 4. Use appliances only with specifically designated WARNING: This product can expose you to battery packs. Use of any other battery packs may chemicals including lead and Di create a risk of injury and fire.
Page 3
Recharge only with the charger specified by Incorrect Worx. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
SPOOL (SEE FIG.J) Only use the appropriate accessories intended for this tool. Accessory EYELET (SEE FIG.J) information can be found on the product packaging, at a Worx dealer or on our website at www.worx.com * Not all the accessories illustrated ordescribed are included in standard delivery.
ASSEMBLY & OPERATION On/Off Switch WARNING! The cutting head continues to rotate after the See Fig. E ACTION FIGURE trimmer has been switched off; wait until it has completely stopped Assembly then lay down the tool. Assembling the Trimmer Shaft See Fig.
Changing the Line Spool (See Fig. K, L) Only one green light At least one battery is almost First take off the cap and remove the old spool. Place new ) is depleted and needs to be spool into cutting head. Feed one line through the eyelet, illuminated.
Battery contacts Clean the battery these do not identify and correct the problem, contact your No charging contaminated. contacts or Worx Customer Service at 1-866-354-Worx. procedure replace the possible. battery. Warning: Switch the machine off and remove the battery prior to any troubleshooting.
Need help?
Do you have a question about the WG183 and is the answer not in the manual?
Questions and answers