Hangar 9 Pulse XT 60 ARF Assembly Manual page 35


Step 6
Attach the X-mount to the motor using the screws
provided with the motor.
Note: Use threadlock on the screws to
prevent them from vibrating loose in flight.

Step 7
Attach the motor to the firewall using four 2
(62mm) aluminum standoffs and four 8-32 x 3-inch
machine screws. Connect the motor to the ESC at this
time as well.
Note: Use threadlock on the screws to
prevent them from vibrating loose in flight.
Section 5: Electric Motor and Cowling Installation

Step 8
Secure the motor battery inside the fuselage using the
hook and loop straps.
Note: If the battery slides on the tray, it may
change the Center of Gravity. To prevent the
battery from moving, apply hook and loop
tape to the battery and the battery tray. This
will keep the battery from sliding on the tray.
7
/ -inch
16
35