Admin Software - Yellowtec iXm Operation Manual

Admin Software

32
The Admin Software
The Admin Software provides special parameters for the administrator.
The intention of the Admin Software is to give the advanced user speci-
fic access to individual parameters. However in most cases there will be
no need to use the Admin Software in order to succesfully use the iXm
in field operations smoothly.
The Software allows you to not only setup one configuration, but save
up to nine different setup compositions. These setups can be saved to
your iXm.
The Admin Software is password protected and allows you to prohibit
unwanted access. It also enables you to reset the iXm to factory settings
or prohibit the ‚User Software' from enabling certain options. This can
be especially helpful when you lend-lease microphones or need certain
options to be enabled for compatibility reasons.
Note that changes in the Admin Software are not being saved auto-
matically to your device. You need to „send settings to device" after
changing parameters.
The Admin Software let's you perform Firmware updates and also add
or delete other Users. You can e.g. create another admin account but
still remain in control of all settings via the Superadmin account.
You will now get a brief overview of what you can do when you login as
admin or superadmin
NOTE: Presets can be recalled on your iXm. You have to
enter the Admin Mode (STOP and FWD) and then use the
FWD and REW keys to switch between your presets.
www.yellowtec.com I info@yellowtec.com