Yellowtec iXm Operation Manual page 29

Starting the Software
The installation folder of your Software is set to C:\Programs\Yellowtec
iXm
You will find two Software Applications. The User Software and the
Admin Software. To get more information about the difference bet-
ween the Softwares please check out the
Admin Software.
The User Software provides status information and fewer options to
allow a fast setup for some of the most important settings needed for
field operations.
The Admin Software will give you a more extended access to the
options and setups of your iXm Recorder Microphone. The Admin
Software is also password secured, can save up to nine different micro-
phone setups and allows you to update your firmware and change your
passwords.
The Software will connect to the device once you have selected the
proper COM Port and pressed the `Connect' button.
When you enter the Admin Software you will be asked for a username
and password! The initial password for `admin' and `superadmin' is:
username:
password:
NOTE: The SuperAdminisitrator can add or remove users,
set or change passwords and update your firmware
You are now ready to configure your iXm's settings, save different se-
tups for different recording scenarios, set or change passwords, update
your iXm's firmware or disable the LEA Engine!
admin / superadmin
qwe123asd
www.yellowtec.com
Installation
Chapters: User Software
I info@yellowtec.com
29
and