Yellowtec iXm Operation Manual page 14

Dashboard indicators
14
7. Remaining battery life
When the remaining battery capacity gets down to approx. 1 hour the
BAT LED will start quick flashing amber. Take a chance to insert fresh AA
batteries or recharge your internal battery.
8. Out of temperature range
NOTE: When you try to charge your iXm while it's out of it's
temperature range the BAT LED will quickly flash red and char-
ging will be automatically disabled.
9. Warning of low memory capacity
When the remaining SD card memory capacity is down to approx. 1
hour the MEM LED will start quick flashing amber to warn that the SD
card should be replaced soon.
When the MEM LED will start flashing red it is time to end and save your
recording.
Solid red and amber BAT LED will indicate in which mode your micro-
phone is in, while your iXm is connected via USB to a PC. A solid red
light means you are connected in configuration mode.
10. USB connection modes
When you connect your iXm to a USB port of a computer you will auto-
matically connect in `mass storage device mode' . Your SD memory card
will show up in your operating system as an external memory. The MEM
LED will illuminate yellow to indicate that your device is connected as
an external memory device.
When your MEM LED lights red it indicates connection in `configuration
mode' . (Also see chapter `User Software´).
www.yellowtec.com I info@yellowtec.com