Yellowtec iXm Operation Manual page 20

Playback
20
How do I
When playing back you navigate through your recordings via the FWW
(6) and the REW (3) Keys on your Playback Keypad. The FWW and the
REW Key have different functions:
In Record Ready mode:
Use the FWW and REW Keys on your Playback Keypad in order to jump
through your recorded files. Pressing the STOP Key (2) on the Playback
Keypad let's your iXm voice message the current file name to your
headphones.
In Playback mode:
Press the FWW or REW Keys in order to jump through your marker
positions. If no markers were set you will jump to the next or previous
file. Press and hold the FFW or REW Keys in order to cue through your
files forwards or backwards.
How do I
Charge the iXm by connecting the wallcharger to the iXm via USB
cable. The mini USB Port is located on the PORT PANEL.
When the iXm is connected to a PC via USB it will also start rechar-
ging. The BAT LED will slowly flash yellow. When fully charged it stops
flashing.
Do I need a
No, you can basically use any headphone with a 3,5 mm jack and an
impedence of >32 Ω.
navigate through my
charge the
NOTE: Before using the iXm for the first time it needs to be
fully charged once.
special
NOTE: It is strongly recommended to check your volume
level before using the headphones in order to prevent hea
ring damage. (see: How do I adjust playback volume?)
www.yellowtec.com
iXm?
headphone?
I info@yellowtec.com
files?