Software Installation - Yellowtec iXm Installation Instructions Manual

Software Installation

You will need to install the software before you can establish a connection between software
and iXm in Configuration Mode.
Installing on Apple macOS
Open the Disk Image file (*.dmg) and drop the Yellowtec folder to the Applications folder as
displayed. If you have an earlier version of the software installed and will be asked now to stop
or exchange the old files with the new one's. Please decide to exchange all files.
Installing on Microsoft Windows
If you have an earlier version of the iXm Software installed, please remove it before installing a
new one. Go to System Settings and Programs and Features. Uninstall both:
iXm Software
-
Windows Driver Package – Yellowtec (usbser) Ports
-
If you have completed uninstalling old software packages, start the setup executable file
(*.exe) and follow the instructions. The setup will install iXm Software and drivers. After
completion you will need to read out the assigned COM port out of Windows' Device Manager.
iXm USB Connections and Software Installation. Changes reserved. Yellowtec 04/2017