Yellowtec iXm Operation Manual page 33

(1) edit preset allows you to save up to nine different configurations of
your iXm. In order to access presets you need to tick the box enable/
disable (2) preset. Note that you can send one preset only at a time.
You should name your microphone with a suitable laben, the
phone Label. It appears in your software, if tagged
prefixes.
All configurable parameters are organized by tabs (5). Most parameters
will be self explanatory to the advanced user. Further information on
the setup of the parameters will be available from our website. Once
you are done, you should name your presets (6)Use activate preset
(7)
to determine which of your presets to use.
Send your entire settings to your device via the tab File
settings to your PC. The tab device
your device information (firmware version) or update it. If you want to
create change or delete Users you can do so via the
on Tab. Please note that you have to be Superadmin for this.
Admin Software
www.yellowtec.com
(9)
gives you the option to view
I info@yellowtec.com
(3) Micro-
(4) in your filename
(8)
or save your
(10) Administrati-
33