Recording - Yellowtec iXm Operation Manual

How do I turn on my
NOTE: Before turning on the iXm make sure that a memory
card with some minimum storage capacity is properly
inserted into the SD Card slot of the Port Panel
Press REC (1) on the Record Keypad and STOP (4) on the Playback Key-
pad simultaneously. Your iXm's booting sequence now initiates.
The Boot sequence may take up to 15 seconds depending on the
memory capacity of the SD Card. Please refer to section `Layout of
controls´ for explanation of LED Signals.
The iXm is now ready to record at any time!
How do I turn off my
Press STOP (2) on the Record Keypad and the STOP (4) on the Playback
Keypad simultaneously to shut the iXm down.
NOTE: In some situations you will not be able to
shut down your iXm. This is to prevent unwanted loss of
data. You will not be able to shut down the microphone
when:
• iXm is performing a recording
• iXm is USB connected to a PC (via USB)
• iXm is being charged (via USB)
How do I make a
Simply press REC (1) after your iXm has been turned on. To stop the
recording you have to press the STOP button and wait for the audio
to be saved to your SD Card.
Several record modes (Pre-Roll/Voice activation) are available (see
also `Dashboard Indicators´).
iXm?

recording?

www.yellowtec.com
Recording
iXm?
I info@yellowtec.com
15