Front Panel Protective Film; Inputs; Outputs - NeoPro JUNEAU Integrator Manual

1 – Matrix Switch Unit
1 – AC Power cord
1 – 6' USB cable
1 – 6' RS-232 cable
1 – User's Guide
1 – CD-ROM driver disc
1 – Pair of rack mount ears with screws
If accessories were ordered, the carton may also contain:
1 – IR remote control

Front Panel Protective Film

There is a clear film over the front panel to protect it during
manufacturing and shipping. Remove this film before using your
matrix switch.

Inputs

Connecting source devices to the matrix switch can be done in any
order. All inputs have the same performance, so organize them as
you see fit.
Be sure to connect the green cable to the Y signal, as this is
handled differently than the Pb and Pr (blue and red) signals.

Outputs

Having a true matrix switch allows you to treat each output as a
'zone'. For example, Output 1 can be the home theater zone, and
output 2 can be the master bedroom zone. In this case you would
run a set of component video cables to each zone. The maximum
length of cable to each zone will vary on the quality of the cable.,
4
Juneau Matrix Switch User's Guide (DOC42-00026-A_NeoPro-Juneau.doc)