Installation
The 12x8 Matrix Switch does not active ventilation, so it can have
other equipment such as amplifiers stacked on top of it. There are
small vents on the sides of the unit, and should be kept clear. The
unit is also equipped with padded feet so it may be stacked on top
of other equipment without causing damage. In either case, to
avoid scratches, never slide equipment on top of one another.
Unpacking
The shipping carton for the 8x16 matrix switch will include the
following items:
1 – Matrix Switch Unit
1 – AC Power cord
1 – 6' USB cable
1- 6' RS-232 cable
1 – User's Guide
1 – Serial Protocol Guide
1 – CD-ROM driver disc
1 – Pair of rack mount ears with screws
Front Panel Protective Film
There is a clear film over the front panel to protect it during
manufacturing and shipping. Remove this film before using your
matrix switch.
Inputs
The Imperial has 12sets of YPbPr component video inputs.
Connecting source devices to the matrix switch can be done in any
order. All inputs have the same performance, so organize them as
you see fit.
4
Imperial Matrix Switch User's Guide (DOC42-00010-A_NeoPro-Imperial.doc)