Table of Contents
Advertisement
1- 6' RS-232 cable
1 – User's Guide
1 – CD-ROM disc with USB drivers
1 – Pair of rack mount ears with screws
If accessories were ordered, the carton may also contain:
1 – IR remote control (optional)
Front Panel Protective Film
There is a clear film over the front panel to protect it during
manufacturing and shipping. Remove this film before using your
Delano matrix switch.
Inputs
Connecting source devices to the Delano can be done in any order.
All inputs have the same performance, so organize them as you see
fit. Just be sure to connect the video "Y", "Pb" and "Pr" signals as
labeled on the rear panel.
Outputs
An output zone is made up of one Cat5 cable from the Delano. The
Hornet also has audio capabilities when used with the Concord
matrix switch, however with the Delano these features are not
utilized.
Output Cabling
In general, we have been referring to the cables as Cat5. The
minimum requirement for successful operation of the Delano
system is Cat5, but Cat5e is preferred. Cat6 may be used as long as
it is construct with 24 AWG wires. Most Cat6 is 24 AWG, but a 22
AWG variety does exist, and should not be used for this system.
6
Delano Matrix Switch User's Guide (DOC42-00022-A_NeoPro-Delano.doc)
Advertisement
Table of Contents
