Table of Contents
Advertisement
Power
Once all the input and output connectors are in place, connect the
power cable to the AC input. If you are not in North America, you
may use your own standard IEC320 power cable with the matrix
switch. The power supply will detect whatever voltage is supplied
(from 90V to 240V AC, 50-60Hz), and adjust accordingly.
Rack Mounting (optional)
The product ships with the rack mount ears detached from the unit.
This is to prevent damage to the chassis during shipment. Use the
supplied screws to attach the ears. The rack ears are universal, so
they fit on either side.
The chassis is a 2 rack units high only when the bottom feet are
removed. Removal requires a Philips screwdriver. Be careful when
turning over the unit as to not scratch the top paint
6
Juneau Matrix Switch User's Guide (DOC42-00026-A_NeoPro-Juneau.doc)
Advertisement
Table of Contents
