Table of Contents
Advertisement
Planar RA-Series
4.
Operation
NOTE: T he control button described in this section is mainly on the
remote control unless specified otherwise.
4.1.
Watch the Connected Video Source
1. Press [
] SOURCE button.
2. Press [ ] or [ ] button to choose a device, then press [
button.
4.2.
Change Aspect Ratio
You can change the aspect ratio to suit the video source. Each video
source has its available aspect ratios..
The aspect ratios depend on the video source:
] FORMAT button.
1. Press [
2. Press [ ] or [ ] button to choose an aspect ratio, then press
[
] button.
Options: Auto, Letterbox, Full Screen, Native, 4:3
4.3.
Choose your Preferred Picture Settings
1. While the display is playing a video source, press the [
button.
2. Press [ ] or [ ] button to choose
[
] button.
3. Options: General, Vivid, Natural, Standard, Movie, Photo, Energy
Saving
4.4.
Choose your Preferred Sound Settings
1. While the display is playing a video source, press [
button.
2. Press [ ] or [ ] button to choose
[
] button.
Options: General, Original, Movie, Music, Game, News.
4.5.
Installing OPS Modules
The Planar RA-Series displays are equipped with an expansion slot that
supports the Intel® Open-Pluggable Specification (OPS). The slot will
support OPS devices such as PC's, SDI modules, HDBaseT receivers,
etc. To install an OPS device, remove the protective cover on the display
and slide the device firmly into position. When installed, the OPS device
will be connected internally to the display. No external video or power
cables are required.
]
] ADJUST
Picture style
, then press
] ADJUST
Sound style
, then press
5.
Change your settings
Using the remote control:
] HOME button to display the OSD menu.
1. Press [
2. Press [ ] [ ] [ ] or [ ] button to choose
Tiling
General
Settings
,
[
] button to enter.
3. Press [ ] [ ] [ ] or [ ] button to choose its menu item or to
adjust its value. Press [
4. Press [
] BACK button to go back to the previous menu layer.
5. Press [
] HOME button to exit the OSD menu.
Using the display's control buttons
1. Press [
] button to display the OSD menu.
] [
] [ ] or [ ] button to choose menu item or adjust
2. Press [
its value.
3. Press [
] button to confirm menu selection and enter its
submenu.
4. Press [
] button to exit the OSD menu.
14
Picture
Sound
,
Network settings
or
. Press
] button to confirm.
,
Advertisement
Table of Contents
