Touch Screen Operation - Planar PS7050 User Manual

Touch Screen Operation

Touch Screen Operation
To use the integrated touch capabilities of the PS7050T and PS8250T, follow these
simple instructions.
1
2
3
The PS7050T and PS8250T are calibrated before shipment, so there should be no
need to calibrate out of the box. If calibration is desired and the operating system is
Windows 7 or 8, go to: C
"Calibrate" as shown below.
When you click on Calibrate, a grid pattern shows on the screen with touch points
identified. Touch all of the identified points, then hit "yes" at the end to store the
calibration.
32
Connect the USB Type B side of the USB cable included in the accessory kit to the
connector on the display I/O panel.
Connect the USB Type A side of the cable to the PC.
For Windows and Linux operating systems, a driver is not required to enable
touch on the display. For MacOSX, a driver is required and can be found on
www.planar.com/support.
ONTROL
PS7050/PS7050T and PS8250/PS8250T User Guide
P > T PC S
ANEL ABLET ETTINGS , then clicking on