Test Printing Using The Printer Only - Oki C911dn User Manual

⿟

Test Printing Using the Printer Only

z
Check that printing is actually enabled using the printer only. Check by printing the device setup and
setup details, which enable the status to be checked. (Printer information.)
Memo
⿟ Print the "printer information" on A4 size paper. Set A4 size paper in the paper feed tray.
Reference
⿟ See
"Turning ON the Power Supply" (P.51)
1
Set A4 paper in tray 1.
2
Check that the standby screen is
displayed in the liquid crystal panel.
3
Press the [Fn] key.
The numerical values input screen will
be displayed.
4
Press [1], [0], [0], and then press the
[OK] button.
5
When [Execute] has been selected,
press the [OK] button.
The printer information will be
displayed.
for how to turn ON the power supply.
- 53 -
Test Printing Using the Printer Only
1
2
3
4