Errors While Scanning; Symbology Parameter Defaults - Motorola DS3508 Product Reference Manual

11 - 2 DS3508 Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 11-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate bar
codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
NOTE See
parameters.
Parameter Defaults
Table 11-1
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
Decode UPC/EAN/JAN Supplemental AIM ID
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Transmit UPC-E1 Check Digit
UPC-A Preamble
UPC-E Preamble
UPC-E1 Preamble
Convert UPC-E to A
Set Default Parameter on page
Appendix A, Standard Default Parameters
Parameter
4-5.
for all user preferences, hosts, and miscellaneous default
Parameter
Default
Number
01h Enable
02h Enable
0Ch Disable
04h Enable
03h Enable
53h Disable
10h Ignore
F1h 43h
F1h 44h
50h 10
F1h A0h Combined
28h Enable
29h Enable
2Ah Enable
22h System Character
23h System Character
24h System Character
25h Disable
Page
Number
11-7
11-7
11-8
11-8
11-9
11-9
11-11
11-13
11-13
11-14
11-14
11-14
11-15
11-16
11-16
11-18
11-19