Local Connection; Making The Installed Printer Driver Known To The Computer - Konica Minolta bizhub 751 User Manual

4
12
Click "Do not search online".
13
Click "Browse my computer for driver software (advanced)".
14
Click the [Browse] button.
15
Specify the desired folder on the DVD that contains the printer driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected: PCL driver, PS driver, XPS driver, fax driver
– For details on fax drivers, refer to the User manual – Fax Driver Operations.
16
Click the [Next] button.
17
Follow the on-screen instructions.
– If the User Account Control window appears, click the [Continue] button.
– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".
18
Click the [Close] button.
19
After installation is completed, make sure that the icon of the installed printer appears in the Printers
window.
20
Remove the DVD from the DVD drive.
This completes the printer driver installation.
4.2.4

Local connection

Note
When a connection is made with the USB port, the local interface kit is required.

Making the installed printer driver known to the computer

To connect this machine using the USB port in Windows Vista/Server 2008/7, install the printer driver before
making it known to the computer with plug and play.
0 To connect this machine using the USB port, an optional local interface kit is necessary.
1
Install the printer driver for this machine.
– Install the printer driver using the Add Printer Wizard.
– To use the Add Printer Wizard, select the USB port to be connected in Select a Printer Port dialog
box.
– For details, refer to "Printer driver installation by searching printers using the Add Printer Wizard" on
page 4-11.
2
Connect this machine to the computer using a USB cable.
3
Turn on the main power of this machine.
The printer driver for this machine is detected and the machine is ready to print.
– If no printer driver is detected, turn this machine off, then on again. In this case, turn off this machine,
and then wait approximately 10 seconds before turning it on again. If you turn this machine on
immediately after turning it off, it may not function correctly.
4
After finishing the installation, make sure that the icon for the installed printer is displayed in the
[Printers] or [Devices and Printers] window.
– If the printer driver is not correctly installed, the driver must be updated using [Update Driver ...]. For
details, refer to page 4-20.
4-18
Manual installation using the Add Printer wizard
IC-208 (Version 2)