Konica Minolta bizhub 751 User Manual page 42

4
7
Click the [Next] button.
The Add Standard TCP/IP Printer Port Wizard starts.
8
Click the [Next] button.
9
In the "Printer Name or IP address" box, enter the IP address for this machine, and then click the [Next]
button.
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the Finish dialog box appears, go to step 13.
10
Select "Custom", and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
12
Click the [Next] button.
13
Click the [Finish] button.
The Add Printer Wizard appears.
14
Click the [Have Disk] button.
15
Click the [Browse] button.
16
Specify the desired folder on the DVD that contains the printer driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected: PCL driver, PS driver, fax driver
– For details on fax drivers, refer to the User manual – Fax Driver Operations.
17
Click the [OK] button.
The "Printers" list appears.
18
Click the [Next] button.
19
Follow the on-screen instructions.
– If the Windows Logo Testing or Digital Signature dialog box appears, click the [Continue] or [Yes]
button.
– When using a network connection, perform a test print after the network settings have been
specified.
20
Click the [Finish] button.
21
When installation is complete, make sure that the icon of the installed printer appears in the Printers
and Faxes window.
22
Remove the DVD from the DVD drive.
This completes the printer driver installation.
4-4
Manual installation using the Add Printer wizard
IC-208 (Version 2)