Konica Minolta bizhub 751 User Manual page 127

Print function of Mac OS X
Function name
Print Type
Binding Position
Combination/Post-
er Mode
Overlap width line
Rotate _180
Image Shift
Chapters
Staple
Punch
Fold & Staple
Note
The "Staple" and "Fold & Staple" functions are available only if the optional finisher or Z folding unit is
installed.
The "Punch" function is available only if the punch kit or Z folding unit is installed with the optional
finisher.
IC-208 (Version 2)
Option
1-Side, 2-Sided, Booklet
Left stitch, right stitch, top stitch
Off, 2 in 1, 2 Repeat, 2 Repeat Re-
versal, 2 × 2, 3 × 3, 4 × 4
ON/OFF
ON/OFF
ON/OFF
Front Side/Back Side
ON/OFF
Page Number
ON/OFF
ON/OFF
Off, Center Staple & Fold, Half-Fold,
Z-Fold, Tri-Fold
Description
Specifies duplex printing and booklet printing.
Specifies the binding position.
When Combination (2 in 1, 2 Repeat, 2 Repeat Re-
versal) is specified, two consecutive pages or one
page and its copy (two pages in total) are printed col-
lectively on a sheet of paper.
When Poster Mode (2 x 2, 3 x 3, 4 x 4) is specified, a
single original is divided into multiple pages and print-
ed.
Specifies the presence of a poster mode overlap. This
setting can be specified when the "Poster Mode" set-
ting is other than "OFF".
Rotates 180° to print.
Prints by shifting the entire print image. The screen is
displayed when the setting is enabled and allows you
to set the detail of the shift length.
Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Specifies the page to be printed on the front side. The
screen is displayed when the setting is enabled and al-
lows you to set the page.
You can specify it when the print type is "2-sided" or
"Booklet".
Specifies the page to be printed on the front side
when "Chapters" is selected.
Specifies stapling.
From the drop-down list, specify the number of sta-
ples and the stapling position.
Specifies hole punching.
From the drop-down list, specify the number of
punches and the position.
Specifies to half fold and center staple.
The selectable items differ depending on the installed
options.
9
9-15