Using The Vehicle Dock; Place The Marathon In The Vehicle Dock; Removing The Marathon From The Vehicle Dock; Using The Desktop Dock - Honeywell Marathon User Manual

Hide thumbs Also See for Marathon:

Table of Contents

Using the Vehicle Dock

1. Attach RAM mount to vehicle (see Marathon Dock Guide).

2. Attach cabled accessories to dock.

3. Attach power cable.

4. Secure cables in the appropriate strain relief cable mounts.

Lower the Marathon into the docking bay until it is seated and then push it back into the dock. The release mechanisms will

slide out of the way, and then spring forward, securing the Marathon in the vehicle dock.

To take the Marathon out of the dock, press down and out on the release mechanisms and the unit will spring forward out of the

dock. Pick the unit up and out of the dock.

1. Place the desktop dock on a stable surface ( see Marathon Cradle Guide).

2. Attach cabled accessories.

3. Attach power cable.

Lower the Marathon straight down into the docking bay until it is seated and then let it fall back into the dock. If desired insert an

extended battery in the spare battery charging bay.

To remove the Marathon from the dock, lift the Marathon straight up and out of the dock. The Marathon can be removed from

the desktop dock with one hand.

Prequisite: The Marathon is in the Dock, and a second monitor is attached to the dock. The Marathon display driver has been

setup to extend the Marathon display to the second monitor.

Use a connected USB mouse to select items on the displays. The mouse can be connected to the Marathon or the desktop

dock.

When the Marathon display driver is setup to extend the Marathon display to the second monitor, cursor calibration on the

Marathon touch display is offset. Do not use the touch panel on the Marathon to select items on the Marathon display. When a

cabled USB mouse is used, the touch screen calibration is correct.

2-16

Table of Contents