Attaching The Hand Strap - Honeywell Marathon User Manual

Attaching the Hand Strap

The hand strap is designed to be used with the Marathon with or without an extended battery attached. The hand strap is
designed so the Marathon can be mounted in the desktop dock or the vehicle dock without removing the hand strap.
1. Place the Marathon with the screen facing down, on a flat stable surface.
2. There are six rubber plugs as illustrated below (stars).
1. Long Hand Strap, approximately 7.4"/18.8 cm without
loop
2. Short Hand Strap, approximately 4.0"/10.2 cm without
loop
3. Strap Buckle
4. Screws, strap attaching
2-9