Firmware Upgrade Procedure - Sanyo PDG-DXL100 Service Manual

5-1-3 Firmware Upgrade Procedure

Set-up
1.
- Hold on "Power" and "Menu" buttons, then plug in
the power cord, the power LED will go to steady
orange, the Temp LED and Lamp LED will go to
steady red.
- Loosen the two buttons.
- Connect projector with PC by RS232 cable.
Note: The system fan and the lamp will not operated.
2. Execute the "DLP Composer
3. Click "Edit" and "Perferences".
TM
Lite 8.3" file.
Lamp LED
Temp LED
Menu button
RS232 port
Power port
PDG-DXL100 Confidential
Power LED
Power button
5-4