Disassemble Main Board Module - Sanyo PDG-DSU30 Service Manual

2-8 Disassemble Main Board
Module
1. Unscrew 3 screws (as red circle).
2. Unplug the connector (as green square)
of Color Wheel.
3. Unplug 6 connectors (as orange square).
Please refer to the table as below for
details of each connector.
Male Connector
Item
on Main Board
A Lamp Driver
B Fan
C Blower
D Photo Sensor
E IR
F Speaker
F
The key feature
Black wire tube (5 pin)
Compose of Red/Yellow/Black
Wire (3 pin)
Compose of Red/Black/White
Wire, white connector and Black
wire tube (3 pin)
Compose of Red/Black/White
Wire, red connector and Black
wire tube (3 pin)
Compose of Red/Black/White
Wire, green connector and Black
wire tube (3 pin)
Compose of Red/Black Wire and
Black wire tube (2 pin)
E D C B
PDG-DSU30 Confidential
A
Figure
2-5