Loose Fuel Filler Cap Message; Vehicle Loading; Vehicle Certification Label - RAM 2013 Cargo VAN Owner's Manual

548 STARTING AND OPERATING
• Tighten the fuel filler cap until you hear a "clicking"
sound. This is an indication that the fuel filler cap is
properly tightened.
• If the gas cap is not tightened properly, the MIL may
come on. Be sure the gas cap is tightened every time
the vehicle is refueled.

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
"gASCAP" message will display in the odometer or a
"CHECK GASCAP" message will be displayed in the
Electronic Vehicle Information Center (EVIC). Refer to
"Electronic Vehicle Information Center" in "Understand-
ing Your Instrument Panel" for further information.
Tighten the fuel filler cap until a "clicking" sound is
heard. This is an indication that the fuel filler cap is
properly tightened. Refer to "Onboard Diagnostic Sys-
tem" in "Maintaining Your Vehicle" for further informa-
tion.
If the problem continues, the message will appear the
next time the vehicle is started. See your authorized
dealer as soon as possible.

VEHICLE LOADING

As required by National Highway Traffic Safety Admin-
istration regulations, your vehicle has a certification label
affixed to the driver's side door or B-Pillar.
If seats are removed for carrying cargo, do not exceed the
specified GVWR and GAWR.

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to
the drivers side "B" Pillar or the rear of the driver's door.